5kW Wind Turbine Generator
5kW Wind Turbine Generator
1. Steady output power and safe running
2.Easy installation and low labor cost
3. CE and ISO
5kW Wind Turbine Generator
The on-grid system contains AH-5kW wind turbine, SMA protection box WBP 600V and
SMA Windy boy 6000A.
Working condition | Wind speed (m/s) | Rotate speed (RPM) | Input voltage (V) | Output power (W) |
Start up | >2.5m/s | 80 | 280 | 1w |
Cut in | 3m/s<v<5m/s | 100 | 280-320 | >1w |
Speed regulation | >12m/s | 260~320 | >500 | 5000~6000w |
Parameter
Parameter | |
Wind rotor diameter | 5.4m |
Type | Three blade, horizontal, up wind |
Blade material | Reinforced fiber glass |
Start up torque | <7.5N·m |
Pitch control regulation | 260~320rpm |
Max rotate speed | <320r/min |
Technical Parameter
Condition | parameter |
Generator type | Permanent magnet, three phase, AC |
Start up torque | <7.5N·m |
Rated rotate speed | 260r/min |
Rated voltage | 500Vdc |
Rated efficiency | >80% |
Capacity | >1.5 times of rated power |
Max rotate speed in zero load condition | 1.2 times of rated rotate speed |
Working temperature | -25°C~65°C |
Working environment humidity | <95% |
On grid controller parameter
| Parameter |
Working voltage scope | 0~600Vdc |
Dump load voltage | 600Vdc |
Dump load capacity | 10kw(recommended) |
| Parameter |
Working voltage scope | 0~600Vdc |
Dump load voltage | 600Vdc |
Dump load capacity | 10kw(recommended) |
On grid inverter parameter setting
Parameter | Valid programmable range | Default | Setting |
Operating Mode | Turbine, Constant v, or MPPT | Turbine | Turbine |
T-Start | 5-1600 sec | 10 | 60 |
T-Stop | 1-1800 sec | 2 | 600 |
Vdc WindStart | 240-600 Vdc | 305 | 305 |
Vdc WindMid | 240-600 Vdc | 370 | 400 |
Vdc WindMax | 240-600 Vdc | 550 | 550 |
P-Wind-Mid | 100-6100 Wac | 1200 | 1400 |
P-Wind-Ramp | 100-2000 W/sec | 1000 | 1000 |
Pmax | 0-6100 Wac | 6100 | 6000 |
System Parameter
Wind rotor diameter | 5.4m |
Blade material | Reinforced fiber glass |
Rated power / max power | 5kw/6kw |
Rated rotate speed | 260r/min |
Rated wind speed | 11m/s |
Start up wind speed | 2.5m/s |
Working wind speed | 3~30m/s |
Survive wind speed | 60m/s |
Working voltage | DC500V |
Speed regulation method | Pitch control |
Stop method | Manual brake |
Generator type | Permanent magnet, three phase, alternator |
Wind turbine weight | 400kg |
Qingdao Anhua New Energy Equipment Co., Ltd. specializes in small and medium wind turbine design and manufacture and is good at off-grid and on-grid system research and development
, and the company has already passed ISO900l Quality Management System and the products have passed CE certificate. Among mature products, AH-500W, AH-1kW, AH-1.5kW and AH-2kW use yawing patented technology and AH-3kW, AH-5kW and AH-10kW adopt the international most advanced mechanical pitch controlled patented technology.